Figure 3
NISSAN RE5RO5A SOLENOID LOCATIONS AND OHM VALUES
Main Line
Pressure Solenoid
Torque Converter
Clutch Solenoid
Direct Clutch
Solenoid
Front Brake
Solenoid
Input Clutch
Solenoid
High and Low
Reverse Clutch
Solenoid
Low Coast
Brake Clutch
Solenoid
3-9 Ohms
3-9 Ohms
3-9 Ohms
3-9 Ohms
3-9 Ohms
3-9 Ohms
11-15/20-40
Ohms
Example: Line Pressure Solenoid. Connect terminals of Ohm meter to the
two terminals in the solenoid shown above, the resistance value should be 3-9 Ohms.
Note: Be Careful not to break the solenoid as it is usually difficult to remove out of the
Valve Body. A simple Punch from the bottom of the Channel plate, to the snout of the
solenoid can ease the removal of the solenoids.
Two Terminals
Copyright © 2010 ATSG
" 2 0 1 0 ” S E M I N A R I N F O R M A T I O N
68
Automatic Transmission Service Group
NISSAN RE5R05A
TORQUE CONVERTER CLUTCH SHUDDER
AND/OR INTERMITTENT SOLENOID/PRESSURE SWITCH CIRCUIT FAULTS
